Capacity
Powder incorporation rates up to 30,000 lbs/hr.
Materials of Construction
All product contact parts are constructed in 316 stainless steel.
Motor Specifications
The standard range of motors includes TEFC and washdown duty. Stainless steel motors are available on request.
Connections
Tri-clamp fittings as standard.
Cleaning
The Flashblend is designed to be cleaned-in-place (CIP) with sterilize-in-place (SIP) as an optional extra.
Electrical
Integral stainless steel control panel.
Sealing
Single mechanical shaft seals as standard. Double mechanical shaft seals and specialized arrangements are optional extras.
Model
|
A
|
B
|
C
|
Total Power HP
|
Typical Powder
Flow Rate (lbs/min) |
Standard Hopper
Volume (cu ft) |
|
| FLB 20 |
57 |
25 ½ |
41 |
8 ½ |
30 |
0.35 |
| FLB 30 |
49 ½ |
39 ½ |
52 ½ |
17 ½ |
50-100 |
3.5 |
| FLB 45 |
71 |
40 ½ |
73 |
30 |
125-250 |
10.5 |
| FLB 60 |
79 |
40 ½ |
75 |
50 |
300-550 |
10.5 |
Powder flowrates are dependent on product characteristics.
The dimensions shown are approximate and certified drawings
should be used for installation purposes.
All dimensions are in inches. Silverson reserves the right to change dimensions
and specifications
without notice.
