Technical Information
The Flashmix is ideally suited to applications in the Food, Cosmetic and Pharmaceutical industries. The range comprises two models, each available with or without a stainless steel sack table.
Materials of Construction
All product contact parts are in 316L stainless steel. The chassis is constructed from 304 square section stainless steel for standard models; Sack Table units constructed in 316 tubular stainless steel.
Motor Specifications
TEFC washdown duty motors are available as standard. Other types of motor and enclosures are available as options.
Inlet and outlet connections
2" Tri-clamp fitting as standard. Other fittings on request.
Sealing
Sanitary EHEDG Approved single mechanical shaft sealing.
Valves
2" Manual butterfly valves as standard.
Hopper
Low profile design for optimized flow. Nominal capacity 10.5 gallons.
Options
- The Flashmix can be mounted on wheels for easy transportation.
- Controls available as an optional extra.
| hp | RPM | A | B | C | Hopper Volume | Inlet/ Outlet | |
| FMX 30 | 5 | 3600 | 47 | 30 | 29 | 10.5 US Gallons | 1.5” |
| FMX 45 | 15 | 3600 | 54 | 41 | 29 | 10.5 US Gallons | 2” |
| hp | RPM | A | B | C | Hopper Volume | Inlet/ Outlet | |
| FMX 30 | 5 | 3600 | 63 | 41 | 28 | 10.5 US Gallons | 1.5” |
| FMX 45 | 15 | 3600 | 63 | 41 | 28 | 10.5 US Gallons | 2” |
Powder and liquid flow rates are dependent on powder characteristics and product.
Nominal values are given as a guide.
All dimensions are in inches. The dimensions shown are approximate and certified
drawings should be used for installation purposes.
Silverson reserves the right to change dimensions and specifications without notice.
