Flashblend Powder/ Liquid Mixers - Technical Information

Capacity
Powder incorporation rates up to 30,000 lbs/hr.

Materials of Construction
All product contact parts are constructed in 316 stainless steel.

Motor Specifications
The standard range of motors includes TEFC and washdown duty. Stainless steel motors are available on request.

Connections
Tri-clamp fittings as standard.

Cleaning
The Flashblend is designed to be cleaned-in-place (CIP) with sterilize-in-place (SIP) as an optional extra.

Electrical
Integral stainless steel control panel.

Sealing
Single mechanical shaft seals as standard. Double mechanical shaft seals and specialized arrangements are optional extras.


Download Printable Version (PDF)
Flashblend Powder/ Liquid Mixers
Model
 
A
 
B
 
C
 
Total Power HP
 
Typical Powder
Flow Rate (lbs/min)
Standard Hopper
Volume (cu ft)
FLB 20 57 25 ½ 41 8 ½ 30 0.35
FLB 30 49 ½ 39 ½ 52 ½ 17 ½ 50-100 3.5
FLB 45 71 40 ½ 73 30 125-250 10.5
FLB 60 79 40 ½ 75 50 300-550 10.5

Powder flowrates are dependent on product characteristics. The dimensions shown are approximate and certified drawings should be used for installation purposes. All dimensions are in inches. Silverson reserves the right to change dimensions and specifications without notice.

Ask the Expert






Send